The Auto Off function does not operate.
The unit is turned on. The Auto Off function activates
after turning off the unit.
- Turn off the unit.
The stations cannot be received.
The sound is hampered by noises.
o
The connection is not correct.
-Connect a power antenna (aerial) control lead
(blue) or accessory power supply lead (red) to the
power supply lead of a car's antenna (aerial)
booster (only when your car has built-in FM/AM
antenna (aerial) in the rear/side glass).
- Check the connection of the car antenna (aerial).
- I f the auto antenna (aerial) will not go up, check
the connection of the power antenna (aerial)
control lead.
Preset tuning is not possible.
o
Store the correct frequency in the memory.
o
The broadcast signal is too weak.
Automatic tuning is not possible.
o
Setting of the local seek mode is not correct.
- Tuning stops too frequently:
Set "LOCAL-ON" (page 17).
- Tuning does not stop at a station:
Set "LOCAL-OFF" (page 17).
o
The broadcast signal is too weak.
-
Perform manual tuning.
During FM reception, the "ST" indication
flashes.
o
Tune in the frequency accurately.
o
The broadcast signal is too weak.
-Set "MONO-ON" (page 18).
An FM program broadcast in stereo is heard in
monaural.
The unit is in monaural reception mode.
-
Set "MONO-OFF" (page 18).
PTY displays ". - - - . - - -."
o
The current station is not an RDS station.
o
RDS data has not been received.
o
The station does not specify the program type.
The disc cannot be loaded.
o
Another disc is already loaded.
o
The disc has been forcibly inserted upside down or in
the wrong way.
The disc does not playback.
o
Defective or dirty disc.
o
The CD-Rs/CD-RWs are not for audio use (page 19).
MP3IWMAJAAC files cannot be played back.
The disc is incompatible with the MP3/WMA/AAC
format and version. For details on playable discs and
formats, visit the support site.