Sony CDX-GT450U Operating Instructions Manual page 26

FM/AM
Compact Disc Player
SONY:
4-198-112-11(1)
-
m
A
B
Installation/Connections
Installation/Connexions
CDX-GT450U
©2010 Sony Corporation Printed in Thailand
1I1111111111111111111111111111111111111111111111111111I
- 4 1 9 8 1 1 2 1 1 - (1)
Notes
• Be sure to connect theground(earth)leadbeforeconneeting the
amplifier.
• Thealarm will only sound if the bUilHnampJifier is used.
Connection diagram
W
Connection example
[g]
OTo a metal surface of the car
Firstconnearheblackgraund(earth)lead,thenconnearheyellaw
and red powersupply leods
eTo the power antenna (aerial) control lead or
power supply lead of antenna (aerial) booster
Notes
./tisnotnecessoryroconnectthisieadifthereisnopower
antenna (aerial) or antenna (aerial) boosler. or with a
manually,operated telescopic antenna (aerial)
• When your car has a built-in FM!AM antenna (aerial) in the rear!
side glass, see "NOles on the control and power supply leads:
eTO
AMP REMOTE IN of an optional power
amplifier
This conneaion is only for amplifiers. Connecting any other system
maydamagetheunit.
o
To the
+
12 V power terminal which is energized
in the accessory position of the ignition switch
Notes
• /fthere is no accessory position, connfft ro the t 12 Vpower
(bartery) terminal which is energized atall times.
Be sure to connfft the black ground (eorth) lead to a metal
surface of the car first
• When your car has a bui/r-in FMlAM antenna (aerial) in the rear!
side glass, see "Notes on the contraland power supply leads:
o
To the
+
12 V power terminal which is energized
at all times
Be sure toconneet the blad ground (earth) lead to a metal surface
ofrhecarfirst.
Cautions
Parts list
OJ
• This unit is designed for negative ground (earth) 12 V
DC
operation
only.
• Do not get the leads under a screw, or caught in moving
parts (e.g. seat railing).
• Before making connections, turn the car ignition ofrlo
avoid shorl circuits.
• Connect the yellow and red power supply leads only
after all other leads have been connected.
• Run all ground (earthlleads to a common ground
(earthl point.
• Be sure to insulate any loose unconnected leads with
electrical tape for safety.
• The use of optical instruments with this product will
increase eye hazard.
Notes on the power supply lead (yellow)
• When connecting this unit in combination with other
stereo components, the connected car circuit's rating
must be higher than the sum of each component's fuse.
• When no car circuits are rated high enough, connect
the unit directly to the battery.
Caution
Handle the bracket
CD
carefully to avoid injuring your
fingers.
• The numbers in the list are keyed to those in the
instructions.
• The bracket
CD
and the protection collar@are
~~~~~~~ ~:;~~:;:te~:~o~::;dJ:~~~~~~~et~;O~t~~i;~
CD
from the unit. For details, see "Removing the
protection collar and the bracket
<I)"
on the reverse
side of the sheet.
• Keep the release keys@forfutureuseastheyare
also necessary if you remove the unit from your
car.
Equipment used in illustrations (not supplied)
Appareils utilises dans les illustrations (non fournis)
D
CD ®
@
~
/
x2
@ ®
~
x4
front speaker
Haut-parleur avant
Active subwoofer
Caisson de graves actif
Catch
Note
Before installing, make sure that the catches on both sides of the brocket
(Dare bent inwards 2 mm ('IJ, in}. If the catches are straight or bent
outwards, the unit will not be installed securely and may spring out.
Rear speaker
Haut-parleur arrlere
Power amplifier
Amplificateur de puissance
http://www. sony. neV