LevelOne WAP-0007 User Manual page 74

Windows 2000 RADIUS server Authentication testing:
1. DUT authenticate PC1 using certificate. (PC2 follows the same test
procedures.)
2. Download and install the certificate on PC1. (Figure 4)
3. PC1 choose the SSID of DUT as the Access Point.
4. Set authentication type of wireless client and RADIUS server both
to EAP_TLS.
5. Disable the wireless connection and enable again.
6. The DUT will send the user's certificate to the RADIUS server, and
then send the message of authentication result to PC1. (Figure 5)
7. Windows XP will prompt that the authentication process is success
or fail and end the authentication procedure. (Figure 6)
8. Terminate the test steps when PC1 get dynamic IP and PING
remote host successfully.
74