Chapter 7: Trouble Shootings; What Can I Do When I Have Some Trouble In The First Time - LevelOne WAP-0007 User Manual

C h a p t e
C h a p t e
C h a p t e

What can I do when I have some trouble in the first time?

1. How do I make the client to connect the WAP-0007?
A: Please prepare for one RJ45 cable and connect the LAN port directly.
WAP-0007 already supports MDI/MDIX.
2. How to "Reset to default"?
A: Press the buttons of "Shutdown" and "Backup" simultaneously over 6
seconds to reset the system to the factory default setting.
3. When I login the storage of WAP-0007 via my network place, but I can
not find any files of Folders even if I have plugged HDD in WAP-0007.
A:
First, check your HD status LED. If the HD is correctly connected, the HD
status LED will flash. If the LED didn't flash, maybe you forget to format
the new HD before using it, or maybe the HD is not connected correctly,
or maybe the HD is corrupted.
WAP-0007 supports FAT/FAT32/EXT2 file systems. If the format of HDD
is NTFS, the device just can read files and cannot copy any files to NTFS
folders
4. No matter what I do, I can not configure WAP-0007 even if I setup fixed
IP and can search or Ping WAP-0007.
A: Please check the WLAN Led or HDD LED. If normal, they will be flash.
Otherwise Reset to Default and try it again.
r 7 : T r o
r 7 : T r o
r 7 : T r o
u b l e S h
u b l e S h
u b l e S h
64
o o t i n g s
o o t i n g s
o o t i n g s