LevelOne WAP-0007 User Manual page 67

Wireless Client Mode: First, please configure the wireless setting of
WAP-0007 via wire. Then use Scan AP of AP-List and join it. Plug up the
cable form WAP-0007. The client from LAN can use "Configure" utility to
Query.
WDS only mode: WDS Wireless Distribution system. This device also
supports this function. How to configure this in your circumstance? The
below Figure1 is for the reference. First, check which channel you want to
use. For example, channel 10. Scan other AP which channel is 10 and
supports WDS function. Second, add the wireless MAC address of
WAP-0007 in this Wireless Router # 2. (Figure2). And use Scan AP to find
the wireless which SSID is "WR-2" and join it in the list. Third, if it is normal,
LAN-Host#1 can find the devices, like Wireless Router #2 and
LAN-Host#2.
67