2.2 Making Connections
In order to access the WAP-0007 as the network storage drive or as an AP,
you may need to configure the TCP/IP settings correctly. Either the "Wired
Ethernet settings" or "Wireless Connection" can be used to connect the
WAP-0007 easily.
2.2.1 Check TCP/IP Settings
WAP-0007 will detect automatically if the DHCP server is existed, it will get a
IP address form DHCP server. If there is no DHCP server, WAP-0007 will
assign a random IP to client and you can get some information as below
shown.
First, go to the command mode and key "ipconfig". If the IP address and
subnet is 0.0.0.0, please key "ipconfig /renew" as follows:
14