LevelOne WAP-0007 User Manual page 44

are delivered to the intended receiver. This option enables you to set
the authentication method for various encryption schemes for the
selected AP.
Open or shared WEP Encryption: Select "64" or "128" bits in the
pull-down menu for encryption method to protect your data by
encrypting it. The WEP key can be 5~13 ASII characters or 10~26
hexadecimal characters based on whether you select 64 bit or 128 bit
WEP encryption.
802.1X: IEEE802.1x authentication can be done by using an external
RADIUS server.
Please input the IP address of RADIUS server and Shared Secret.
Please refer to FAQ in Chapter 7 to get more detailed information.
WPA-PSK: AP and Client need to use identical Pre-shared key (PSK).
Please input 64 Hex key (0~F) or 8~63 characters in ASCII Type.
Note. This device only supports WPA version 1.
WPA: WPA applies IEEE802.1x and Extensible Authentication
Protocol (EAP) to authenticate wireless clients using an external
RADIUS server.
Please input the IP address of RADIUS and Shared Secret.
Please refer to FAQ in Chapter 7 to get more detailed information.
44