LevelOne WAP-0007 User Manual page 52

The advanced setting items are shown as below:
For the meanings of above items, please refer to "Advanced setting".
After saving the values of client mode, you have to go back the "Wireless
Client mode Basic Setting" page and click "Save" on the top of the page. Then
you could check the settings that you have done.
3.2.2.3 WDS Hybrid mode
Select the "WDS Hybrid mode" and click "Go" to set up
After entering the WDS Hybrid mode setting, click the AP List icon to set up
the AP connecting list. Then click the "AP Setting" icon and set up the AP.
52