Lubricant Specifications - Ford 2004 Expedition Owner's Manual

of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.
3
Add the coolant type originally equipped in your vehicle.
4
Your vehicle's rear axle is filled with a synthetic rear axle lubricant and
is considered lubricated for life. These lubricants are not to be checked
or changed unless a leak is suspected, service is required or the axle has
been submerged in water. The axle lubricant should be changed any time
the axle has been submerged in water.
Service refill capacities are determined by filling the rear axle 23mm (0.9
inch) below the bottom of the filler hole.
5
Add 118 ml (4 oz.) of FEHP Friction Modifier XL-7 (or equivalent) for
complete refill of Limited Slip axles. For complete refills, fill using the
Additive Friction Modifier first.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C153–H and the API Certification mark.

LUBRICANT SPECIFICATIONS

Ford part
Item
name
Hinges, latches, Multi-Purpose
striker plates Grease
and rotors, seat
tracks, fuel filler
door hinge and
spring
Lock cylinders, Penetrating and
swing-away Lock Lubricant
spare tire carrier
padlock
Brake fluid Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
2004 Expedition (exd)
Owners Guide (post-2002-fmt)
USA English (fus)
Maintenance and Specifications
Ford part
number
XG-4 or XL-5
Motorcraft XL-1 none
PM-1
Ford
specification
ESR-M1C159-A
or ESB-M1C93-B
ESA-M6C25-A
and DOT 3
341