Overview Of Publish Modes - Epson PP-50BD User Manual

Overview of Publish Modes

Writing data to CDs/DVDs/BDs, printing labels that you created/edited, and reading data
from CDs/DVDs/BDs are called "Publish" in EPSON Total Disc Maker.
Note:
❏ To write, copy, or print on BDs is possible only with the PP-50BD.
❏ To read data from CDs/DVDs/BDs is possible only with the PP-50BD.
Standard Mode
This mode uses stacker 1 as the input stacker, and stacker 2 or 3 as the output stacker.
When stacker 2 is selected as the output stacker, up to 50 CDs/DVDs/BDs can be created
at once. Also, if you refill discs in the input stacker and take out published discs from the
output stacker at the same time, up to 1000 CDs/DVDs/BDs can be published in a single
job.
& See "Standard Mode" on page 33.
Low-Volume Mode
This mode uses stacker 1 and 2 as the input stackers, and stacker 3 as the output stacker.
Different types of discs (CD, DVD, or BD) can be loaded into each of the 2 stackers and
can create different types of discs. This is ideal for creating small batches of discs at once.
If the same type of discs are loaded into stacker 1 and 2 and Auto is selected for the input
stacker setting, up to 100 CDs/DVDs/BDs can be continuously published by taking out
published discs without refilling discs.
Up to 1000 CDs/DVDs/BDs can be continuously published in a single job by refilling discs
and taking out published discs.
& See "Low-Volume Mode" on page 45
Read Back Mode (only for PP-50BD)
This mode uses stacker 1 as the input stacker, and stacker 2 as the output stacker.
Data in upto 50 CDs/DVDs/BDs in stacker 1 can be read at once. You can store the data
in your local/network HDD as files or a disc image file.
& See "Read Back Mode (Only for PP-50BD)" on page 58
27
Publishing Discs