Vacuuming with accessories
For your safety, turn power switch to 'off' before
attaching accessories. Press switch to 'hard floor'
setting when using accessories.
To use accessories: With Quick Release handle in upright
position, rotate handle release latch forward, then lift
handle and pull away from vacuum cleaner body (Fig. 1).
Extend or shorten the telescopic wand by pressing
release button ➁ (Fig. 2).
Use crevice tool or turbo nozzle with or without wand.
Press button ➀ to pull wand off handle (Fig. 2).
Use for baseboards, furniture, vents and blinds (Fig. 4).
To use, press dusting brush button ➂ and slide brush
to end of wand until it clicks (Fig. 3).
After using, slide brush back until it clicks.
Use for grooves, narrow openings, tight spaces (Fig. 5).
To use, push tool onto handle or wand until snug.
Store crevice tool on back of vacuum.
Use for stairs and upholstered furniture (Fig. 6).
To use, push nozzle onto handle or wand until snug.
Store turbo nozzle on front of vacuum.
Position vacuum cleaner on floor at bottom of stairs,
pushed against bottom step (Fig. 7).
For your safety, do not place vacuum at top of stairs
or on steps.
After using accessories
Press button ➁ to shorten wand. Press button ➂ and
slide dusting brush back into storage position (Fig. 2).
If wand is off, push back onto handle until it clicks.
Place wand into opening on back of vacuum (Fig. 8A).
Align ribs on wand into grooves at top of vacuum
(Fig 8B). Push down handle until it locks into position.
Electrolux Customer Service 1-800-896-9756