Sony Vaio VGX-TP1 Series User Manual page 55

~55
'\.A f 0
Using Your VAIO Compute
Controlling your TV volume with the supplied remote commander
You can change the volume on your TV with the supplied remote commander by changing the remote commander1s signal
setting to match with the one used by your TV manufacturer.
Press and hold the OK button and press alphanumeric buttons to enter the desired manufacturer code. For example, press
and hold the OK button and press the 0 and 2 buttons consecutively to enter the manufacturer code for Sony: Sony (02).
Manufacturer
Code
VAIO computer
01
(default setting)
Sony
02
Samsung
03,05,06,08,11,13
Toshiba
07,09
Panasonic
04,10
Sharp
07, 12
!
If your TV manufacturer has more than one manufacturer code, you may not be able to control the TV volume with the remote commander even though
you have specified one of them for matching the signal setting. In such acase, try another code.
Changes to this signal setting for the TV volume control may not work on some TVs. Sony assumes no liability for the controllability.