Bridged Mode For Single Pc; Routing Mode Over Atm - 3Com 3CRWE754G72-A User Manual

Bridged Mode for
Single PC
Routing Mode over
ATM
Enter a value of 0 to disable this timeout.
8 Click Apply.
Figure 33 Bridge Mode for Single PC Screen
1 Enter the VPI and VCI parameters provided to you by your ISP in the VPI
and VCI fields.
2 Select the encapsulation type (LLC or VC MUX) in the Encapsulation Type
field. This information will have been provided to you by your ISP.
3 Click Apply.
Figure 34 Routing Mode over ATM Screen
1 Enter the IP address, Subnet Mask and Default Gateway information
provided by your ISP into the IP address, Subnet Mask and Default Route
fields.
2 Enter the VPI and VCI parameters provided to you by your ISP in the VPI
and VCI fields.
Internet Settings 47