Snmp Trap - 3Com 3CRWE754G72-A User Manual

64 C 5: R
HAPTER OUTER

SNMP Trap

C
ONFIGURATION
Figure 51 SNMP Trap Screen
You can configure your router to send status messages to the SNMP
management agent if a problem occurs on the network. To configure
traps:
1 In the IP Address field, enter the IP address of the PC to which you want
your router to send status messages.
2 In the Community field, enter the name of the SNMP communication
channel to which you want your router to send status messages.
3 Set the Version field to match the version of trap messaging that your
SNMP management agent supports. The router supports V1 and V2c trap
messaging.