Ptt Settings - Zte J G380 User Manual

1. In standby mode, select Menu > PTT Settings;
2. Select your desired item to make setting:
PTT Function: select On or Off to activate or deactivate PTT function.
Watching Function: select On or Off to activate or deactivate PTT watching function.
SupplementSvc: set the PTT supplement service.
Call Attribute: set PTT call attribute as Normal or Pre-emptive.
DynaManagement: manage the PTT group.
Add Member: add member to PTT group.
●
Delete Member: delete member from PTT group.
●
Set Priority: set group member PTT call priority.
●
Set Talk Time: set group member maximum talk time.
●
Supplement Svc Set: set the supplement functions.
Private Call Forward: activate, deactivate or query PTT private call forward function, and
●
set call forward number.
Duty Number: set duty number and status. when the status set as onduty, you can
●
receive the duty number PTT call, when the status set as offduty, you would not receive
the duty number PTT call.
PTT CNIR: set PTT number identification restriction function. After activate this function,
●
PTT number will not be identified during the PTT call.
Call Alert Busy: activate, deactivate or query call alert busy function. After activate this
●
function, You could receive the other incoming call prompt when you are making a call.
Key Set: set the key function.
End Key in PTT Call: set the function of End Key during the PTT call.
ZTE-J G380 GoTa Digital Trunking Phone User Manual

PTT Settings

61