Remove The Battery; Insert The Uim Card - Zte J G380 User Manual

ZTE-J G380 GoTa Digital Trunking Phone User Manual

Remove the Battery

1. Make sure that your mobile phone is powered off;
2. Remove the battery cover;
3. Pull the battery up and remove it from the battery compartment.

Insert the UIM Card

Note:
• Contact your network service provider to check whether your mobile phone support UIM card.
• Make sure your mobile phone is powered off and the charger is disconnected from the phone.
1. Remove the battery if it is installed;
2. Locate the UIM card slot, then insert the UIM card with its gold contacts facing down and its cut-off
corner facing out the card slot;
3. Slide the UIM card completely into the slot.
22