Add Contacts In Uim; Ptt System Group; All List - Zte J G380 User Manual

ZTE-J G380 GoTa Digital Trunking Phone User Manual

Add Contacts in UIM

1. In standby mode, select Menu > Contacts > Add Name > UIM;
2. Press the Up / Down Keys to edit the following items:
Name: enter the contact's name.
Number: enter the contact's phone number.
3. Select Save to save the information.

PTT System Group

Note: PTT system group is updated by system automatically, and you can set up to 3 groups as
watching groups.
1. In standby mode, select Menu > Contacts > PTT System Group;
2. Select your desired system group by pressing the Up / Down Keys;
3. Hold the PTT Key to start dialing, and speak after hearing a beep sound; Release the PTT Key to
listen to the other party or back to the idle status.

All List

1. In standby mode, select Contacts;
2. Input the first letter of the contacts' name, and the cursor will highlight the corresponding
contact automatically. Select your desired contact by pressing the Up / Down Keys, and select
Option to make the following operations:
Edit: edit the contact's information.
Add Name: add new contact in phone or UIM card.
Send Message: sent message to the contact.
Call: call the contact.
Multiple Select: select one or more pieces of contact information, then you can select Option
to Copy, Move, Delete, New IM, Select All, Cancel All or Single Select.
44