Setting Up; Attaching The Table-Top Stand (Except Kdl-60Ex700); Connecting An Antenna (Aerial)/Cable/Vcr - Sony Bravia KDL-60EX700 Operating Instructions Manual

Setting Up

Attaching the Table-Top
Stand (except KDL-
60EX700)
1
Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
2
Place the TV set on the Table-Top
Stand.
3
Fix the TV to the Table-Top Stand
according to the arrow marks
guide the screw holes using the
supplied screws.
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
4
After all the screws are tightened,
attach the supplied stand rear cover to
the Table-Top Stand.
KDL-40/32EX710 and KDL-40/32EX700 only
4
GB
Connecting an antenna
(aerial)/cable/VCR
Connecting an antenna (aerial)/cable
that
Antenna (aerial) cable
(not supplied)