Installing The Accessories (Wall-Mount Bracket) - Sony Bravia KDL-60EX700 Operating Instructions Manual

Installing the Accessories (Wall-Mount Bracket)

To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL500/SU-WL50B Wall-Mount Bracket (sold separately).
• Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
• Refer to "Detaching the Table-Top Stand from the TV" (page 7).
~
• Place the TV on the Table-Top Stand, when securing the Mounting Hook.
• Be sure to store the removed screws in a safe place, keeping them away from children.
• When attaching the Table-Top Stand again, be sure to fasten the removed screws to the original holes on the
rear of the TV.
SU-WL500
Square
hole
Mounting Hook
Sufficient expertise is required for installing this product, especially to determine the strength of
the wall for withstanding the TV's weight. Be sure to entrust the attachment of this product to the
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
* Except for KDL-46/40/32EX710.
SU-WL50B
Screw
(+PSW
6 × 16)
Before
installing,
remove screws*
Mounting Hook
(Continued)
Screw
(+PSW
6 × 16)
13
GB