Fcc Compliance - AMX NetLinx ZigBee Compatible Gateway and Repeater NXR-ZGW/-ZRP Operation/Reference Manual

NetLinx Master
NetLinx Master
FIG. 4 Multiple PAN ID Network

FCC Compliance

This device complies with Part 15 of the FCC rules. Subject to the following two conditions:
1. This device must not cause harmful interference and
2. This device must accept all interference, including interference that interferes with the operation of
this device.
Modifications not expressly approved by the manufacturer will void the user's authority to operate the
equipment."
This device has been evaluated and found to be compliant with the FCC Rules for RF
Exposure when the device is operated at a minimum separation distance of 2 cm.
from the user and nearby persons. Operation of this device at closer distances
should be avoided.
NXR-ZGW/-ZRP
1 hop
NXR-ZGW
(Coordinator)
CAT5 Ethernet
Mio R-4
connection
PAN ID 1
1 hop
NXR-ZGW
(Coordinator)
Mio R-4 Mio R-4
CAT5 Ethernet
connection
Mio R-4
2 hops 3 hops
NXR-ZRP
(Router)
Mio R-4 Mio R-4
PAN ID 2
Overview
NXR-ZRP
(Router)
Mio R-4 Mio R-4
7