To Disconnect The Usb Cable; Operating Picture Motion Browser - Sony Handycam DCR-SR45 Operating Manual

us
28
®
Confirm the installation settings, then click
[Install].
" Notes
• Even if a screen prompting you to restart
your computer appears, you do not need to
restart it at this time. Restart your computer
after completing the installation.
• It may take some time for the
authentication.
@
Follow the on-screen instructions to install
the software.
• Depending on the computer, you may
need to install third party software. If the
installation screen appears, follow the
instructions to install the required software.
@
Restart the computer if required to complete
the installation.
@
Remove the CD-ROM from the disc drive of
your computer.
To disconnect the USB cable
["j
<D
Click the _ icon - [Safely remove USB
Mass Storage Device] - [OK] (Windows
2000 only) on the task tray on the bottom
right of the desktop of your computer.
®
Touch [END] - [YES] on the screen of your
camcorder.
@)
Disconnect the USB cable.
• Operating "Picture Motion Browser"
To start "Picture Motion Browser," click
[Start]
~
[All Programs]
~
[Sony
Picture Utility]
~
[PMB - Picture Motion
Browser].
For the basic operation of "Picture Motion
Browser," see "PMB Guide."
To display "PMB Guide," click [Start]
~
[All Programs]
~
[Sony Picture Utility]
~
[Help]
~
[PMB Guide] .
.
~.
Tips
• If the [USB SELECT] screen does not appear,
touch
ft
(HOME) -
ffi
(OTHERS) - [USB
CONNECT].