Sony Handycam DCR-SR45 Operating Manual page 170

.Ventilation
The slots and openings in the cabinet are provided
for necessary ventilation. To ensure reliable
operation of the set, and to protect it from
overheating, these slots and openings must never
be blocked or covered.
- Never cover the slots and openings with a cloth
or other materials.
- Never block the slots and openings by placing
the set on a bed, sofa, rug, or other similar
surface.
- Never place the set in a confined space, such as
a bookcase, or built-in cabinet, unless proper
ventilation is provided.
- Do not place the set near or over a radiator or
heat register, or where it is exposed to direct
sunlight.
.Lightning
For added protection for this set during a lightning
storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system. This
will prevent damage to the set due to lightning and
power-line surges.
• Damage Requiring Service
Unplug the set from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
- When the power cord or plug is damaged or
frayed.
- If liquid has been spilled or objects have fallen
into the set.
- If the set has been exposed to rain or water.
- If the set has been subject to excessive shock by
being dropped, or the cabinet has been damaged.
- If the set does not operate normally when
following the operating instructions. Adjust only
those controls that are specified in the operating
instructions. Improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the set to normal operation.
- When the set exhibits a distinct change in
performance - this indicates a need for service.
• Servicing
Do not attempt to service the set yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
• Replacement parts
When replacement parts are required, be sure
the service technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
• Safety Check
Upon completion of any service or repairs to the
set, ask the service technician to perform routine
safety checks (as specified by the manufacturer)
to determine that the set is in safe operating
condition.