Dialing From The Outgoing / Incoming Menu; Dialing The Most Recent Outgoing / Incoming Number; Making Calls From The Call Log; Answering A Call - Samsung iDCS Release 2/OfficeServ User Manual

DIALING FROM THE OUTGOING /
INCOMING MENU
• From the station idle screen, press the MENU button and select P-BOOK.
• Select DIALED Nos or RECEIVED Nos from the submenu. These menus will
store the last thirty calls made to and from the station.
• Press the select button on the display, associated with the number to redial or
use the DIRECTION or SCROLL button to move the cursor to the desired
number. Press the ENTER button to display the detailed information of the
number.
• Press the SEND button to dial the number.
DIALING THE MOST RECENT OUTGOING /
INCOMING NUMBER
• Press the SEND button. The most recent call (Internal or External) to or from
the station will be displayed.
• Continue to press the SEND button and the system will automatically dial the
number for you.

MAKING CALLS FROM THE CALL LOG

The Station Call Log displays the last outgoing station, and incoming trunk calls.
The total number of calls that can be displayed is 60. You may redial any of these
calls from the Call Log.
• Press the SEND button to display the first page of the CALL LOG.
• Use the SCROLL button or the DIRECTION button to navigate to the desired
number. Use the UP and DOWN arrows, associated with the top left and right
soft keys to advance and return through the CALL LOG Screens.
• When the desired number is highlighted, press the SEND button.
• The number will be automatically dialed.

ANSWERING A CALL

• Lift the handset and you are automatically connected to the ringing call. See
Ring Preference under Customizing Your Keyset—OR—press the SEND button
to automatically answer on the speakerphone.
• While a call is ringing in, the display will indicate the type of call coming in
(station number and name, trunk number and name, etc.)
NOTES:
1. If a call is flashing at your keyset but not ringing, you must press the flashing
button to answer.
2. While a call is ringing in, press the SCREEN button to display the programma-
ble button screen. This will enable you to view and invoke any of the station
features that you may wish.

UNIVERSAL ANSWER

Outside lines may be programmed to ring a general alerting device. To answer
calls ringing this device, dial 67—OR—press the UA button. This device can oper-
ate in any one of the six different ring plans.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before dialing.
RECALL DIAL TONE
• Press the NEW button to disconnect your existing call, wait for dial tone and
then make a new call on the same line.
NOTE: If this button does not appear on your keyset, the FLASH button may be
programmed to recall dial tone.

SENDING A FLASH

While on an outside call, press the FLASH button to send a flash to the telephone
company. This is required for some custom calling features or CENTREX use.
NOTE: Flash is not available on an ISDN circuit.
BUSY LINE QUEUING WITH CALLBACK
If you receive a busy signal when you are selecting an outside line, this means that
the line or group of lines is busy.
• Press the CALLBACK button, if programmed, or dial 44, you will hear confir-
mation tone.
• Press the ANS/RLS or END button.
• When the line becomes free, the system will call you back.
• Lift the handset or press the SEND button to answer, wait for dial tone and dial
the telephone number or speed dial number again.
NOTES:
1. A callback will be canceled if not answered within 30 seconds. If you have set
a callback, the cursor associated with the CALLBACK button will be solid
black.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER button before dialing.
17 18