Software Upgrade
The receiver software can be upgraded. The
software upgrade menu can be accessed through
Menu > Settings > Upgrade. This is shown below:
USB Upgrade
The USB upgrade is a fast and convenient way
to upgrade the system software, You simply
copy the upgrade file onto a USB memory stick,
and plug the USB device into the system USB
interface. You can then upgrade the software as
follows:
•
Before a USB upgrade, you must prepare
the upgrade file. The file name is usually a
*.bin (not case sensitive), Otherwise the
system can not enter the upgrade mode.
•
The size of the USB upgrade file must be
less than or equal to 4M bytes, if not it may
result in a failure to upgrade.
•
USB upgrade:
-
Enter the USB upgrade menu
press(menu -> setting -> upgrade ->
USB upgrade)
Enter the USB directory list page, as
shown below:
-
Select the upgrade file and press the
"enter" key to start the upgrade. Enter
the upgrade page to show information
and prompt the user on the upgrade
process:
•
The whole USB upgrade process may take
a couple of minutes.
•
DO NOT switch off the power during the
upgrade process.
•
When the upgrade has finished, the system
will automatically restart with the new
firmware.
38