Watching Tv - Triax TR 112 Operating Manual

Watching TV

Getting Started
Connect the Aerial to RF In and connect the
External Power Supply to the DC Input. Connect
the HDMI or SCART output to the TV.
Initial Power Up - Power On/Off
When in "Standby" mode, press the
remote control to switch on the receiver. Pressing
the key again will put the receiver back in to
"standby" mode.
First Time Installation
On initial power up, the screen below will be
displayed indicating there are no channels stored.
The initial installation screen shows several basic
set-up parameters, as shown below
The user can select the OSD Language, Country,
Time Zone, Active Antenna and LCN from this
menu.
Press "Start Search" to search channels as
shown below:
key on the
Volume Adjustment and Mute
Press "Vol +/-" to adjust the volume when the
system is in normal playing mode; A volume bar
is displayed
Press "Mute" to disable the sound, pressing
"Mute" again will enable the sound.
Changing Channels
Press "CH+/-" to switch to the previous or next
programme in the channel list.
Alternatively press the number keys to input the
programme number directly.
10