Av Settings; Contrast; Brightness & Stauration; Spdif - Triax TR 112 Operating Manual

AV Settings

To enter this menu, press 'MAIN MENU > AV',
then press 'ENTER'.
The AV setup menu is shown in the picture below

Contrast

You can set the system Contrast by using the
Contrast option.
(1) To select the Contrast option, press the RIGHT
key to move the cursor into the properties list,
press "ENTER" to select contrast menu. Press
LEFT/RIGHT to adjust the contrast. As shown
below:
(2) The Contrast can be set from 0 to 24.
(3) The default Contrast setting is 12.
Brightness & Saturation
To adjust the Brightness and Saturation settings,
follow the same process as for the Contrast
setting above.

SPDIF

This setting is used to select AVC Mode - Mute,
PCM and Bitstream.

Aspect Ratio

The Aspect Ratio settings are used to select
the video output mode in order to match the
receiving equipment.
Select the Aspect Ratio option, press ENTER to
select.
Press the UP/DOWN key to toggle between
options;
Aspect Ratio can be set as 16: 9, 4: 3 PanScan,
4: 3 LetterBox,16:9 PanScan
Press ENTER to save the setting
25