Fasten Right Monitor And Connect Power Cable - Cisco TelePresence MX700 Installation Manual
Dual camera mounted on the wall
Hide thumbs
Also See for TelePresence MX700:
- Reference manual (241 pages) ,
- Administrator's manual (141 pages) ,
- Installation manual (32 pages)
Table of Contents
Advertisement
Installation guide for Cisco TelePresence MX700 Dual camera - Wall mount
12
Fasten right monitor and connect power cable
4 × M6x90
(countersunk)
4 × M6x35
(countersunk)
78-100279-01 B0 | 2014 JUNE | © 2014 Cisco Systems, Inc. All rights reserved.
Enter four screws from front and
1
four screws from underneath.
Then, tighten all screws.
Connect the loose end of the power
2
cable from step 10 to the close-by
socket at the rear of the right monitor.
The socket must be reached from below.
Make sure the power switch next to the
socket is in its ON position.
Page 15
Advertisement
Table of Contents
