Menu Items - Samsung HG40NA590 Installation Manual

Menu Items

¦
To Enter this menu: Press the
To Exit from this menu : AC Power off, and then turn on again. Any changes you made are saved.
Menu
Hospitality
Hospitality Mode
Mode
SI Vendor
SI Vendor
Power On
Channel EN
Power On
Channel
Channel Type
Power On
Volume EN
Power On
Power On
Volume
Min Volume
Max Volume
Panel Button
Power On
Source
Power On
Option
Channel Setup
Channel Editor
Channel
Dynamic SI
20
English
[HG590790-ZA]ENG.indd 20
→ → → →
MUTE 1 1 9
Item initial Value
Select the Hospitality mode.
Standalone y Standalone
y Interactive
Available in the Interactive menu only.
Select the SI Vendor.
Samsung
y Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardinal /
Set the default values, which will be applied when the TV is turned on.
y User Defined : Refers to the settings configured for Power On
Last Saved
y Last Saved : Refers to the last saved settings.
When the TV is turned on, it switches automatically to this channel when
3
in Stand Alone Hospitality mode.
Channel search CABLE and AIR.
... y ATD, DTV : ON-AIR
y CATV (Cable Analog TV), CDTV (Cable Digital TV) : CABLE TV
Set the default volume values which will be applied when the TV is turned
on.
Last Saved
y User Defined : Uses the settings configured for Power On Volume.
y Last Saved : Uses the last saved settings.
... TV will switch on at this Volume Level in Stand Alone Hospitality mode.
0 Minimum Volume Level user can set in Stand Alone Hospitality mode.
100 Maximum Volume Level user can set in Stand Alone Hospitality mode.
Front panel (Local key) operation on/off.
y Unlock : Unlock all panel keys
Unlock y Lock : Lock all panel keys
Lock
y Power : Lock all panel buttons except Power
y Menu/Source : Lock Menu and Source
TV Select the input source the TV displays when it is turned on.
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
Last Option
- LAST OPT: Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
You can use the Channel menu option in the OSD.
Edit channel numbers and names.
y On : Check the DTV Program channel number. (DTV channel editor
ON
y Off : No check of the DTV Program channel number. (DTV channel
ENTER buttons in order.
Description
Guestek / SeaChange / EBL
Channel, Channel Type.
is inaccessible)
editor is accessible, but additional channel program number update
is not supported)
2012-03-22 오후 3:47:26