Menu Items - Samsung HG43NF690U Installation Manual

Menu Items

To Enter this menu: Press the
To exit from this menu: Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
✎ The menu item does not support depending on the models.
Hotel TV Function
Category
Hospitality
Hospitality Mode
Mode
SI Vendor SI Vendor
Power On Channel
Power On Channel Num When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
Power On Volume
Power On
Power On Volume Num The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume
Max Volume
Power On Source
Power On Option
MUTE → 1 → 1 → 9
Item
Select Hospitality Mode.
y Interactive mode: TV works with an SI STB or SBB.
y Standalone mode: TV works alone, without an SI STB or SBB.
y Interactive mode: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek / SeaChange /
MDC / Innvue
y Standalone mode: OFF / Smoovie / SSCP
Set the Power On values that will be applied when the TV is turned.
y User Defined: Lets you set Power On Channel and Channel Type manually. See Power On
Channel and Channel Type below.
y Last Saved: If you select this item, when the TV is turned on, it displays the channel it was
displaying when it was turned off.
y Select channel band: ATV (analog air band), DTV (digital air band), CATV (analog cable band),
CDTV (digital cable band), IPTV (Ip Channels).
y User Defined: Lets you set the Power On Volume manually. See Power On Volume below.
y Last Saved: When the TV is turned on, it returns to the volume that had been set when the
power had been turned off.
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
The maximum Volume Level the user in Stand Alone Hospitality mode.
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have unplugged
the TV and then plugged it in again.
y Last Option: Returns to its last Power state. If it was in Stand-by, it returns to Standby. If it was
on, it turns on.
y Power ON: When the power returns, the TV turns on.
y Standby: When the power returns, the TV enters the Standby mode.
→ SelectE buttons in order.
Description
25
English