Samsung HG40NA590 Installation Manual page 32

y Hotel Plug & Play OSD
– Initial Highlight: Interactive
– If you select the Standalone Only button, the Standalone hotel mode is set by default and the "Standalone mode is set"
OSD appears for 3 seconds.
– TV enters into RF mode automatically after displaying "Standalone mode is set" OSD for 3 seconds.
– If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit from the
Interactive menu.
– If you select the Standalone Plug & Play mode, the "Select Menu Language" OSD appears.
y Select Menu Language OSD
– If you select Standalone from the "Select Hotel TV Mode" OSD, the "Select Menu Language" OSD appears.
– Initial Highlight : English
– Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
– If you press the Enter key, the "Select Country" OSD appears
y Clock Mode OSD
– Initial Highlight: Auto.
– Display time: 30 seconds.
– The Clock Set item OSD appears if you select Manual.
– If you press the Enter key after setting the clock, or while in Auto clock set, the Picture Mode OSD appears.
y Set daylight saving time OSD
– Initial Highlight: Off
– If you press the Enter key, the Select the DST area OSD appears.
y Picture Mode OSD
– Initial Highlight: Dynamic.
– The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode.
– After you select the picture mode, the TV displays the Standalone Setup Menu OSD. Press power off to exit.
y Auto Search Mode OSD
– If you select the Skip option, the TV displays the Clock Mode OSD.
– If you press the Enter key, the TV auto searches for channels.
– The OSD Display time, which starts at the time that Auto Store is completed and goes to the time Auto Sort starts, is 30
seconds.
32
English
[HG590790-ZA]ENG.indd 32 2012-03-22 오후 3:47:28