nOTe: When using a custom range, you
may not receive any digital depth read-
ings, or you may receive incorrect depth
information.
Frequency
Controls the transducer frequency
used by the unit.
This unit supports the following frequencies: 50
kHz, 83 kHz, 200 kHz, Low CHIRP, Medium CHIRP
and High CHIRP.
Only frequencies supported by your transducer
will be shown on the Frequency menu.
Custom range menu
Sonar Frequencies
50 kHz
83 kHz
200 kHz
Low CHIRP
Medium CHIRP
High CHIRP
17
Best depth penetration with
lower resolution
Wider cone angle provides
more bottom coverage
Highest sensitivity and best
target separation in shallow
water
Provides the best depth
penetration with lower
resolution
Better
depth
penetration
than High CHIRP with minimal
loss of target separation
Better resolution in shallow
water than Medium CHIRP
Sonar Operation |
Elite-5x & Elite-7x