Sonar Menu - Lowrance Elite-5x Operation Manual

This results in better image quality, better target
separation and greater depth penetration.
This unit supports High CHIRP and Medium CHIRP
frequencies. You can use CHIRP with Lowrance
conventional sonar transducers.
• 50/200 kHz (Low/High CHIRP)
• 83/200 kHz (Medium/High CHIRP)
CHIRP Setup
1. Select a CHIRP transducer type from
the Transducer type menu
2. Select the desired CHIRP frequency
from the Frequency menu

Sonar Menu

Press Menu from any sonar
page to access the Sonar
menu.
Sonar Menu
(Advanced Mode)
Adjust
Used to make adjustments to Sensitivity
and Colorline/Grayscale.
15
(Options active
with Downscan
overlay turned on)
Sonar Operation | Elite-5x & Elite-7x