Related Manuals for Lowrance Elite 5X DSI
Summary of Contents for Lowrance Elite 5X DSI
- Page 1 Elite 5X DSI, Mark 5X DSI, Elite 4X DSI & Mark 4X DSI Installation & Operation Operation manual manual...
- Page 2 Copyright © 2011 Navico All rights reserved. Lowrance® and Navico® are registered trademarks of Navico. Navico may find it necessary to change or end our policies, regulations and special offers at any time. We reserve the right to do so without notice. All features and specifications subject to change without notice.
-
Page 3: Table Of Contents
Contenidos Introducción ........2 Uso de DSI ..........9 Trackback ..........9 Funcionamiento básico ....3 Menú DSI..........9 Asistente de configuración ...... 3 Ajustar ........... 10 Paginas............ 3 Escala ............ 10 Acceso al Menú de ajustes...... 3 DSI interpretación......13 Funcionamiento de los menús.... - Page 4 Introduction Introduction Unit Controls Getting Started To turn on/off the unit, LIGhT/Power: controls backlight press and hold the LIGhT/ level and turns unit on/off Turn unit on/off Power three KeYPAD: controls cursor & selects seconds. items on menus This unit has 10 backlight PAGeS: allows you to select a page to Adjusting levels.
-
Page 5: Introducción
Basic operation Setup wizard DSI menu The Setup wizard will appear when the unit is turned on for the first time. To choose your own settings, do not run the setup wizard. DSI menu DSI page To restart the Setup wizard, restore defaults. Accessing the Settings menu Pages This unit has three pages: DSI, Split frequency and... -
Page 6: Funcionamiento Básico
Basic operation Basic operation Accessing menu items On/Off features Select an on/off menu item The keypad and enTer key are used to select and press enTer to turn menu items and open submenus. Use the keypad it on/off. to highlight the desired item and press enTer. Dropdown menus After accessing the dropdown menu, press the keypad up/down to select... -
Page 7: Funcionamiento De Los Menús
Basic operation Dialogs To input text: 1. Use the keypad to select the desired Dialogs are used for user input or for presenting in- character and press enTer. formation to the user. 2. Repeat Step 1 for each character. Depending on the type of infor- mation or entry, different meth- 3. -
Page 8: Standby Mode
Basic operation Standby mode Adjusting the display Lowers power consumption by turning off sonar You can make adjustments to the display using and the display. Contrast and Color settings. Both are covered in the DSI section. Press the PWR/Light key to ac- cess the Backlight dialog. -
Page 9: Página De Dsi
Pages Pages DSI Split Frequency page DSI Page Split Frequency DSI Page Displays both transducer frequencies at the same Displays the water column moving from right to time. 800 kHz provides the best resolution, while left on your unit’s screen. 455 kHz has greater depth coverage. -
Page 10: Zoom Dividido
Pages overlay Data Allows you to select data (water temperature, depth, etc) to be displayed on top of the DSI screen. You can also turn on/off the display of configured overlay data using the Show setting. Overlay data Show Enables/disables the display of overlay data, allow- ing you to remove overlay data from the screen without deleting the selected overlay data con- DSI Split Zoom... - Page 11 Pages Configure 6. Press MenU and select Return to overlays. Used to select and customize overlay data for dis- 7. Press MenU, select Done Configuring play on the DSI screen. and press enTer. To select overlay data: 1. From a DSI page, press MenU. 2.
-
Page 12: Funcionamiento De La Dsi
Using DSI DSI menu Press Menu from any DSI page to view the DSI DSI history bar menu. Stop sonar: Trackback pauses the sonar screen You can review your sonar history by pressing the keypad to the left until the screen starts to move in reverse and the sonar history bar appears at the bottom of the screen. -
Page 13: Ajustar
Adjust Range Accesses the Contrast adjustment Selects the deepest range shown on the scrollbar, allowing you to adjust display. Range settings display the sec- contrast settings. tion of the water column from the water surface to the selected depth range. Contrast Custom Range —... - Page 14 chrome uinits only support Grayscale and Reverse noTe: When using a custom range, you Grayscale settings. may not receive any digital depth read- ings, or you may recieve incorrect depth information. Surface Clarity Surface Clarity reduces surface clutter by decreas- ing the sensitivity of the receiver near the surface.
- Page 15 Overlay Data Allows you to select data (water temperature, depth, etc) to be displayed on top of the DSI screen. Overlay data Overlay data setup is covered in the Pages section. Settings Accesses the settings menu.
-
Page 16: Dsi Interpretation
DSI Interpretation Baitball Pipes Bridge piling Baitfish on the move... - Page 17 DSI Interpretation Fish Thermocline Structure Structure Fish Trees...
-
Page 18: Ajustes
Settings Settings Settings Menu System Accesses installation and configuration settings for Adjusts unit settings like language, mute audio your unit. and advanced mode. Settings Turns on/off menu unit audio System menu Displays soft- ware informa- tion... -
Page 19: Sonda
Settings Set Language Lowrance periodically updates unit software to add features and improve functionality. To see the Selects the language used on latest available software version go to www.low- menus and text boxes. rance.com. Mute Audio Sonar Turns on/off unit audio, like key beeps, alarm Used to make adjustments to Sonar options and sounds, etc. - Page 20 Settings Noise Rejection Installation Uses advanced signal processing to monitor the ef- Provides access to Keel Offset and Temp Calibration fects noise (boat pumps, water conditions, engine settings. ignitiion systems, etc.) has on your display, and then filters out the undesired signals. Manual Mode Installation menu Restricts digital depth capability, so the unit will...
-
Page 21: Alarmas
Settings Alarms Enables Shallow alarm and allows you to select the alarm threshold. The Shallow alarm sounds an alarm when your ves- Transducer sel enters water shallower than the selected shal- Keel low threshold. Keel Offset (-3.5 feet) Before setting keel offset, measure the distance from the transducer to the lowest part of the keel. -
Page 22: Specifications
Specifications Elite 5x DSI & Mark 5X DSI DSI Sonar General 250 ft (61m) Max depth 5.4” H (134mm) x 6.8” W (174mm); 6” H (152mm) Transducer Case Size 455/800kHz with bracket Frequency Mark 5x: 1.35lbs (613kgs) 50 mph (80 kph) - Page 23 Specifications Elite 4x DSI & Mark 4X DSI DSI Sonar General 200 ft (76m) Max depth 5.6” H (144mm) x 3.7” W (94.3mm); 6.4” H (164mm) Transducer Case Size 455/800kHz with bracket Frequency Elite 4: (3.5” diagonal) 320x240 (256 color) TFT 50 mph (80 kph) Max speed Display...
- Page 24 Index Split Frequency 7 Split Zoom 8 About 17 Frequency 12 On/Off features 4 Standby mode 6 Adjusting contrast 11 Overlay Data 8, 13 Stop Sonar 12 Alarms 19 Configure 9 Surface Clarity 12 Customizing 9 System settings 16 Installation menu 18 Show 8 Color 12 Contrast 11...
- Page 25 LEI Extras is the accessory source for sonar and GPS products manufactured by Lowrance Electronics. To order Lowrance accessories, please contact: 1) Your local marine dealer or consumer electronics store. To locate a Lowrance dealer, visit the web site, www.low- rance.com, and look for the Dealer Locator; or, consult your telephone directory for listings.
- Page 26 Visit our website: www.lowrance.com © Copyright 2011 *988-10149-001* All Rights Reserved Navico Holding AS...