Extending Wiring On Smartport ® Harness - Hunter ROAM XL Owners Manual And Programming Instructions

EXTENdING WIRING ON sMARTPORT
Use a special shielded cable to connect the
SmartPort to the controller if installing the connector
®
more than 2 m (6 ft.) of wire from the controller.
The use of shielded cable will reduce the potential
for radio and electrical interference. The SmartPort
should never be installed more than 15 m (50 ft.)
metres away from the controller.
For easiest installation, order a Hunter SRR-SCWH
SmartPort wiring harness with a full 7.6 m (25 ft.) of
®
shielded cable.
SRC TERMINAL BLOCK
AC AC R RS
BLUE
HUNTER SRR-SCWH
WHITE
RED
BLUE
WIRING HARNESS
WHITE
®
ICC TERMINAL BLOCK
RS
BLUE
R
WHITE
AC
RED
AC
PRO-C TERMINAL BLOCK
SEN
SEN
BLUE
REM
WHITE
AC2
RED
AC1
RED
GRD
HARNEss
HUNTER SRR-SCWH WIRING HARNESS
HUNTER SRR-SCWH WIRING HARNESS
BLUE
WHITE
RED
BLUE
WHITE
RED
13