Extending Wiring On Smartport ® Harness - Hunter SRR Owner's Manual And Installation Instructions

EXTENDING WIRING ON SmartPort
Use shielded cable to connect the SmartPort to the
controller if installing the connector more than 2
meters of wiring length from the controller. The
use of shielded cable will eliminate the potential for
radio interference by preventing the wire as acting
as an antenna. At no time should the SmartPort
be installed more than 15 meters away from the
controller.
For easiest installation, order a Hunter SRS-SCWH
SmartPort wiring harness with a full 7.6 meters of
shielded cable.
SRC TERMINAL BLOCK
AC AC R RS
BLUE
WHITE
RED
10
HUNTER SRR-SCWH
WIRING HARNESS
®
ICC TERMINAL BLOCK
RS
BLUE
R
WHITE
AC
RED
AC
BLUE
WHITE
RED
HARNESS.........................
HUNTER SRR-SCWH WIRING HARNESS
BLUE
WHITE
RED