Extron electronics PVS 405D User Manual page 35

Command ASCII (Telnet)
(host to switcher)
Query updated
4Q
firmware
version
Example:
4Q
Information requests
Request switcher part
N
number
Request AV input
I
number
Request model name
1I
Request model
2I
description
Read hardware E
address (MAC)
Set verbose mode
24 EX11)
Read verbose mode E
Set unit name EX11*
Set unit name to E
factory default
View unit name
E
Reset (Zap) command
E
Reset all device settings
to factory
NOTE:
X!
= Video and audio input selection, 1‑5
X10) = Default name: combination of model name and last 3 hex pairs of MAC address (for example PVS‑405D‑06‑DE‑2E).
X10$ = Hardware (MAC) address: (00‑05‑A6‑xx‑xx‑xx)
X11) = Verbose/Response mode, (default = 0 for telnet connections, 1 for RS‑232 and USB host control). 0 = Clear/none,
1= Verbose mode, 2 = Tagged responses for queries, 3 = Verbose mode and tagged responses for queries.
X11* = Unit name is a text string up to 24 characters drawn from the alphabet (A‑Z), digits (0‑9), minus sign/hyphen (‑).
No blank or space characters are permitted as part of a name. No distinction is made between upper and lower case. The
first character must be an alpha character. The last character must not be a minus sign/hyphen.
X12) = Firmware Query ('Q' commands)
*Q = Firmware and build number [<X.YY.ZZZZ> ]
0Q = Verbose version information [<2Q> ‑ <3Q> ‑ < 4Q>] sum of responses from 2Q‑3Q‑4Q.
1Q = Firmware version [<currently running code (X.YY)>]
2Q = Final stage bootloader (Uboot) version [<X.YY>]
3Q = Factory base code version [<factory base code (X.YY)>*]
4Q = Updated firmware version [<updated code version (X.YY)>*]
Response
(switcher to host)
X12)
]
Ver04*1.00
60-1235-01
Verbose response Pno
60-1235-01
X!
Vid
PVS 405D
Verbose response
Inf01*PVS 405D
PoleVault Digital
Switcher
Verbose response Inf02*PoleVault
Digital Switcher
} X10$]
CH
Verbose response Iph•xx-xx-xx-xx-xx-
]
xx
} X11)]
CV Vrb
} X11)]
CV
Verbose response X11)]
Vrb
} X11*]
CN Ipn•
} X10)]
Ipn•
•CN
} X11*]
CN
} ]
ZXXX Zpx
Additional Description
Use this command to find out which
version of firmware has been uploaded
into the processor post‑factory.
In this example, firmware version is 1.00.
] Show switcher part number.
]
X!] Show current active video and audio
•Aud
inputs.
Show device name
]
Show device description
]
X10$
(MAC) address (xx-xx-xx-xx-xx-xx).
Set verbose mode.
Set the unit name. (
alphanumeric characters). Special
characters (spaces or blanks) not allowed.
Set the unit name back to default. Default
name
name and last 3 hex pairs of MAC address
(for example PVS‑405D‑06‑DE‑2E).
View the current unit name (
E
audio settings
PVS 405D • SIS Communication and Control
= hardware media access control
X11*
up to 24
X10)
is a combination of model
X11*
).
ZXXX command resets all video and
29