Extron electronics PVS 405D User Manual page 30

Command ASCII Command
(host to switcher)
Power save mode
Power save off
E0PSAV}
Enable Auto power
E1PSAV}
save on
Force auto power
E2PSAV}
save on
Force standby
E3PSAV}
power save on
Force network
E4PSAV}
standby power save
on
View setting
EPSAV}
Verbose response
Device Information Requests
View internal 20S
temperature (ºC)
Verbose response
View fan status
21S
Verbose response
View switchable 1S
Signal, Normal, and
Peak status
Verbose response
View VL receiver Mic
4S
input Signal, Normal,
and Peak status
Verbose response
NOTE:
X1) = On/off status: 0 = off/disable; 1 = on/enable
X2* = Power save mode/state:
0 = auto power save and standby power mode off (power save off) (default)
1 = set auto power save timer running, but not triggered
2 = Force auto power save on
3 = Force standby power save on
4 = Force network standby power save on (turn off network switch)
X2( = Temperature in °C. The response is 3 digits with leading zeros
X3@ = On/off status: 0 = off/disable; 1 = on/enable
Response
(switcher to host)
PsavX2*]
PsavX2*]
PsavX2*]
PsavX2*]
PsavX2*]
X2*]
PsavX2*]
X2(]
Sts20*X2(]
X3@]
Sts21*X3@]
SigX1)•NormX1)•
ClpX1)]
Sts01*SigX1)•NormX1)•
ClpX1)]
SigX1)•NormX1)
•ClpX1)]
Sts04*SigX1)•NormX1)•
ClpX1)]
PVS 405D • SIS Communication and Control
Additional Description
Turns off power save mode and sets
timer to zero (default).
Timer start count but is not triggered.
Switcher goes into auto power save
mode when there is no active AV signal
for 25 minutes.
Turns on auto power save mode.
Turns on standby power mode.
Turns on standby power mode (network
switch off).
View power save status.
View internal temperature in degrees C.
View status of internal fan.
View switchable audio Signal, Normal,
and Peak status.
View VoiceLIft receiver Mic input Signal,
Normal, and Peak status.
24