Optional Distribution Joint Kits - Sanyo R410A Installation Instructions Manual

1-13. Optional Distribution Joint Kits

See the installation instructions packaged with the distribution joint kit for the installation procedure.
Table 1-12
Model name
1. APR-CHRZP900BAB
2. APR-RZP224BAB
3. APR-RZP680BAB
4. APR-RZP1350BAB
■ Tubing size (with thermal insulation)
1. APR-CHRZP900BAB
For outdoor unit (Capacity after distribution joint is 307.100 BTU/h or less.)
Note that the dimension marked with every alphabetical letter in the diagram shows the inner diameter.
Suction Tube
11-13/16
#C
B
C
Distribution
Joint
*Insulators for both the Suction tube and the Discharge tube are the same.
*Suction tube and Discharge tube are similar in sizes and both the tube entrances have the same diameter. So the both
Distribution joints can fit into different tubes. Since the diameter of the tube ends for both Suction and Discharge tube are
different, take care not to connect the distribution joint different. See the " # " marks on the above figures.
Table 1-13 Dimensions for connections of each part
Size Part B
1-1/4
Inch
Cooling capacity after distribution
307.100 BTU/h or less
76.400 BTU/h or less
232.000 BTU/h or less
460.700 BTU/h or less
C D E E
#C
D
E
Insulation
Part C Part D Part E
1-1/8 1 7/8
Remarks
For outdoor unit
For indoor unit
For indoor unit
For indoor unit
Discharge Tube
11-13/16
#C
D
C
#C
D
E
F
Insulation
Part F Part G Part H
3/4 5/8 1/2
13
Liquid Tube
G
F
E
C D E F
G F E
I H
13-25/64
Insulation
Part I
3/8
E FG
H I
Unit: in.