Iiyama AQU5611D BK User Manual page 28

20
AQU5611D BK/AQU5611DT BK 9.2 Million Pixels Color TFT LCD Monitor USER MANUAL
The screen is blank The display mode of the
and the power indicator computer is outside the
is blinking amber every range of the monitor
second
The screen is blank The monitor fan is not
and the power indicator working
is blinking amber every
0.25 second
The image appears to There are noises in the
be smeared video signal
A few dots are missing, The LCD contains over 27,000,000 thin-film transistors (TFTs). A
discolored, or small number of dots may be missing, discolored, or lighted on
inappropriately lighted the screen. This is an intrinsic characteristic of the TFT LCD
technology and is not an LCD defect.
v Reconfigure the computer to use a
supported display mode.
v The video graphics card is
defective. Replace it.
v The computer is defective. Replace
it.
v Make sure that the power cord is
firmly plugged into the electrical
outlet.
v Make sure that the power adapter
cord is firmly connected. If the
symptom remains, call your retailer
or iiyama.
v The video graphics card is
defective. Replace it.
v The computer is defective. Replace
it.
v Make sure that the signal cable is
firmly connected.
v Make sure that no pins are bent in
the signal cable connector.
v The video graphics card is
defective. Replace it.
v The computer is defective. Replace
it.