Dip Switches - Vidia PTZ User Manual

5.2
Overview of DIP switches
There are three sets of DIP switch on board for different setup purposes.
location #
DS1
DS2
DS3
Refer to the picture on below for DIP switch locations.
The following paragraphs are providing the detail descriptions of the three main
setups. Installer should read it with care, before starts doing the hardware mounting
and cabling work.
5.3
Vidia Srl – Via Vasanello 23, 00189 Roma – Tel +39 0630316333 Fax +39 0630350231 www.vidia.it

DIP switches

bit quantity
8
8
2
Set Up Device ID Number
used for
Protocol / baud rate setup
Device ID setup
Network impedance
DS3 DS1 DS2