Table of Contents
Advertisement
6.2
Locate the base onto the place the camera is to mount, and fix the base on
1.
the place tightly with screws through the 3 holes on the
base
(be sure screws are complete in the ceiling)
Get the camera and secure it to the base with the
2.
supplied metal chain.
Then fit the camera body to the base, rotate the camera
3.
body clockwise until it is completely locked into position.
Put the screw A
4.
In case of dealing with a
a.
Mark the locations for screw through the holes on the base
b.
Make holes on the wall, then insert the supplied plastic plugs into
the holes and squeeze them in until they are flush with the wall
surface.
c. Mount the base on the desired place tightly with screws
Vidia Srl – Via Vasanello 23, 00189 Roma – Tel +39 0630316333 Fax +39 0630350231 www.vidia.it
Surface mount onto Ceiling
in position and screw it in
(anti-loss)
concrete wall
:
Advertisement
Table of Contents
