Wall -Mounting - Vidia PTZ User Manual

6.3
To mount the camera from ceiling, a metal wall-mount bracket in separate package
will be needed.
The mounting procedure
Step 1
Get the metal bowl and mounting base, put
them together with screws to make them a
sub-assembly for mounting.
Step 2
Hook the sub-assembly and camera with the safety cable located on the
bottom of camera
throughout the sub-assembly
Step 3
Fasten the sub-assembly and
camera together. Rotate camera
all the way clockwise. Fix the
base to camera with the supplied
screw and wrench.
Step 4
Get the wall-mount bracket. Remove the metal cover (sheet) from the
bracket
Vidia Srl – Via Vasanello 23, 00189 Roma – Tel +39 0630316333 Fax +39 0630350231 www.vidia.it
Wall-mounting
(left picture on below
Fig-1
), then put the signal cables
.
(right picture)