Memory Card Operation; Disc Notes - Beat 485 Owner's Manual

Mobile audio system
Table of Contents

Advertisement

OPERATION
select USB mode.
When playing the MP3 files in the device,
the operation is the same with the
MP3 operation described above.
Note:
The main unit can only support the
standard USB-memory device.
USB MP3 player is not a standard
which means different brand name or
different
models
standard. So our product cannot
support all MP3 players.
When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player
then connect it to the USB interface.
Otherwise, it may cause battery burst.
When in USB play mode, be sure not
to remove the USB driver from the USB
interface.

MEMORY CARD OPERATION

There is a memory card interface (23) on
the front panel of the unit.
When you insert a memory card in the
memory card interface, the unit will search
the MP3/WMA files in the card and start to
play MP3/ WMA files automatically.
The operation is the same with the MP3/
operation described above. If in other
mode, you can also press MOD button (21)
to select memory card play mode.
CAUTION
When there are important files in the USB
device or memory card, do not connect it to
the main unit to play. And don't play the
CD-R/RW disc that has important files in it.
Because any wrong operation may cause
files loss. And our company assumes no
responsibility for this.
have
their
own
15

DISC NOTES

A. Notes on discs:
1. Attempting to use non-standard shape
discs (e.g. square, start, heart) may
damage the unit. Be sure to use round
shape CD discs only for this unit.
2. Do not stick paper or tape, etc, onto the
label side or the recording side of any
discs, as it may cause a malfunction.
3. Dirt, dust, scratches and warping discs
will cause misoperation.
B.
Notes
on
CD-Rs
CDs)/CD-RWs (rewritable CDs):
1. The unit cannot play a CD-R and
CD-RW that is not finalized. (Please
refer
to
the
CD-R/CD-RW
CD-R/CD-RW software for more
information on finalization process).
2. Depending on the recording status,
conditions
of
equipment used for the recording, some
CD-Rs/CD-RWs may not be played on
this unit. (see *1)
*1: To have more reliable play back, please
see following recommendations:
a: Use CD-RWs with speed 1x to 4x
and write with speed 1x to 2x.
b. Use CD-Rs with speed 1x to 8x and
write with speed 1x to 2x.
c. Do not play a CD-RW which has
been written for more than 5 times.
C. Notes on MP3 files (MP3 Version
Only):
1. The disc must be in the ISO9660 level 1
or level 2 format, or Joliet or Romeo in
the expansion format.
2. When naming a MP3 file, be sure the
file name extension is ".MP3".
3. For a non-MP3 file, even though the file
name extension is ".MP3", the unit
cannot recognize it.
(recordable
manual
of
your
recorder
or
the
disc
and
the

Advertisement

Table of Contents
loading

Table of Contents