Station Storing; Rds Operation - Beat 485 Owner's Manual

Mobile audio system
Table of Contents

Advertisement

OPERATION
finished. And then 6 strongest stations
are stored into the corresponding
preset number button.
- Program scanning
Press AS/PS button (22) shortly to scan
preset station. When the field strength
level is more than the threshold level of
stop level, the radio is holding at that
preset number for several seconds with
release mute, then searches again.

STATION STORING

Press any one of the preset buttons (17) (1
to 6) to select a station, which had been
stored in the memory. Press this button for
several seconds to store the current station
into the number button.
RDS (RADIO DATA SYSTEM)
OPERATION
-
Setting RDS mode
Press AF button (6) and release
immediately to switch on or off RDS
mode.
Whenever RDS is switch on, symbol
"AF" appears on the display.
Program
name
receiving a RDS station.
"AF" starts blinking if the broadcasting
signal getting worse.
"ALARM" will be displayed when an
emergency broadcasting is received,
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume control
is set at minimum.
- Regional Program Operation
Press AF button (6) for several seconds
to switch on or off region mode.
Some broadcasting stations change
their program from normal broadcasting
to regional broadcasting for a certain
time period. When region is on, the
current listening program remains
unchanged. When region is off, it allows
the reception moves to the regional
station.
is
displayed
on
- Using PTY to Select Program
PTY button (24) is operated as follows:
While selecting PTY engagement, its
selection is implemented by preset
buttons as described in notes.
When PTY is selected, the radio starts
to
search
information,
corresponding
detected.
If corresponding PTY information is not
existed any more, PTY engaging is
automatically exit to normal mode.
Notes:
When PTY mode is engaged, the
PTY switch is shared as follows:
According to above 2 allotted groups,
the preset number is used for PTY
selection as follows:
MUSIC group
* POP M, ROCK M
*EASY M, LIGHT M
*CLASSICS, OTHER M
*JAZZ, COUNTRY
*NATION M, OLDIES
*FOLK M
SPEECH group
*NEWS, AFFAIRS, INFO
*SPORT, EDUCATE, DRAMA
*CULTURE, SCIENCE, VARIED
*WEATHER, FINANCE, CHILDREN
*SOCIAL, RELIGION, PHONE IN
*TRAVEL, LEISURE, DOCUMENT
-
Listening to Traffic Announcement
TA button (9) is operated as follows:
When pressed shortly it is engaging
whether TA mode on or off.
When TA mode is on and a traffic
announcement is transmitted:
11
corresponding
PTY
and
stops
if
information
PTY
the
is

Advertisement

Table of Contents
loading

Table of Contents