Table of Contents
Advertisement
OPERATION
When the unit was in CD (MP3) or AUX
IN mode, it will switch temporarily to
radio mode.
Temporary switch over to an EON
linked station when EON detects a
traffic announcement on that other
program.
If the volume level was under the
threshold point it will be raised to the
threshold point. But the user changed
the volume level, which was more than
the threshold point (min. TA volume
level), it will be set to the last level.
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA mode will not be off.
When pressed long, it is selected EON
TA LOCAL/EON TA DISTANCE mode.
The purpose of this key is to reduce
unwanted EON TA switching, which
EON TA information was received from
current station and the radio switched to
that
EON
linked
information could not be received
because the EON linked station is
located too far from that area. So the
radio is switched back to current station
again. In above operation, a customer
listens to a wrong program or mute
sound for a while.
EON TA LOCAL mode
When the filed strength level of EON
linked is less than threshold level, the
radio does not switch that station, and a
customer can hardly listen to any
disturbances.
When EON TA LOCAL mode is
selected, "EONTA LO" on numeric
display is indicated for a few seconds.
station,
but
no
12
EON TA DISTANCE mode
EON TA switch is tried to implemented
by the information of current station.
When EON TA DISTANCE mode is
selected, "EONTA DX" on numeric
display is indicated for a few seconds.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast
station
expressed
characters
AF: Alternative Frequencies
Frequency
list
stations
transmitting
program
TP: Traffic Program Identification
Identification
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or
not
EON: Enhanced Other Networks
Information
Broadcasting information on PI, AF,
TP, TA, etc, relating to networks
other than the network used for
current reception
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.
DAB OPERATION
SWITCHING TO DAB MODE
Press MOD button (21) shortly to select
DAB mode. If there isn't any DAB program
received, it will return to the current mode.
SELECTING THE FREQUENCY BAND
At radio mode, press BND/LOU/ENT
button (7) shortly to select the desired
name
data
in
alphanumerically
of
broadcasting
the
same
data
for
traffic
Advertisement
Table of Contents
