Basic Operation; Switching On/Off The Unit; Faceplate Release; Sound Adjustment - Beat 485 Owner's Manual

OPERATION

BASIC OPERATION

SWITCHING ON/OFF THE UNIT

Switch on the unit by pressing any button
(except button (8) and
When system is on, press
turn off the unit.

FACEPLATE RELEASE

Press button (2) to detach the
removable faceplate.

SOUND ADJUSTMENT

Press SEL button (3) shortly to select the
desired adjustment mode. The adjustment
mode will change in the following order:
VOL BAS TRB
(Volume) (Bass) (Treble) (Balance) (Fader)
By rotating the volume knob (3) clockwise or
counter-clockwise, it is possible to adjust the
desired sound quality.

SYSTEM SETTING

Press and hold SEL button (3) on the front
panel to enter system setting mode. Then
shortly press SEL button (3) to select the
item you want to change and rotate the
volume knob (3)
corresponding setting.
1) BEEP ALL/OFF/2ND
Use the volume knob (3) to set Beep
sound ALL, OFF or 2ND.
- BEEP 2ND mode:
The beep is only generated when all
allowed double key is pressed long (1
sec).
e.g.
When preset button (17) is pressed.
When BND/LOU/ENT button (7) is
pressed.
When AS/PS (Navi-SCH) button (22) is
pressed.
- BEEP ALL mode:
The beep is generated when every key
is pressed.
- BEEP OFF mode:
The beep is disabled.
button (2)).
button (1) to
BAL FAD
to change the
2) AREA EUR/USA
Use the volume knob (3) to set EUR
or USA area frequency spacing.
3) TA SEEK/ALARM
Use the volume knob (3) to set TA
SEEK or TA ALARM.
Traffic announcements
TA SEEK: With activated TA
function the unit searches for a
station with
ments.
TA ALARM: No automatic station
search. The unit sounds a beep
tone if no traffic information is
received
displayed. SEEK PI is displayed if
the selected station does not
transmit an RDS signal.
4) PI SOUND/MUTE
Use the volume knob (3) to set PI
SOUND or PI MUTE.
Moving into an area where two stations
with identical AF, but different Pl code
(PI = program information) are
received destabilizes reception. In this
situation you have two options:
PI SOUND: To change stations the
other station is played for less than
one second.
PI MUTE: The other station is
muted.
5) RETUNE L/S
Use the volume knob (3) to set
RETUNE L or RETUNE S.
Delay for automatic search with traffic
announcements and/or program
information:
S (short) after approx. 30 seconds;
L (long) after approx. 90 seconds.
9
traffic announce-
and NO TP/TA is