Usb Play Operation; Memory Card Operation - Beat 525 Owner's Manual

Mobile audio/video system
Table of Contents

Advertisement

OPERATION
1) Item: TT
Function: Display the current title
number and total title
number.
2) Item: CH
Function: Display the current chapter
number and total chapter number.
3) Item:
(This icon only displayed
for several seconds, after several
seconds it will disappeared.)
Function: Display the played time of
the current chapter.
4) C-: Display the remaining time of the
current chapter.
5) T: Display the played time of the
current title.
6) T-: Display the remaining time of the
current title.
7) C: Display the played time of the
current chapter.
8)
Display the current disc's Language,
Audio type, subtitle language and
Play angle.
Note: The displayed information is
different according to different type of
discs.
Last Play Memory
1) During disc playback, if you turn off
the unit and then turn on the unit
again, the DVD unit will resume
playing from the point that just
interrupted.
2) During disc playback, if you press
MODE button to switch to other mode,
then return to DVD mode again, the
unit will resume playing from the point
that just interrupted.

USB PLAY OPERATION

On the front of the unit, when you open
the USB cover, you will see an USB
interface. An USB device can be
connected through this interface.
When you connect an USB device
through the interface, the unit will search
the files in the USB driver and start to
play automatically.
If in other mode, you can also press
MODE button to select USB mode.
When playing the audio/video/photo files
in the device, the operation is the same
with DVD operation described above.
NOTE:
When in USB play mode, be sure
not to remove the USB driver from
the USB interface.
When stop USB play, you can
remove the USB drive, after remove
USB driver from the unit.
When connecting an MP3 player
and there has normal battery in the
player (non rechargeable battery),
you should remove the battery from
the MP3 player then connect it to
the USB interface. Otherwise, it
may cause battery burst.

MEMORY CARD OPERATION

On the front of the unit, when you open
the USB cover, you will see a memory
card interface. You can insert a memory
card into the interface.
When you insert a memory card in the
memory interface, the unit will search
the files in the card and start to play
automatically. The operation is the same
with the DVD operation described
above.
If in other mode, you can also press
MODE button to select Card mode.
The corresponding operation please
refer to the DVD OPERATION.
21

Advertisement

Table of Contents
loading

Table of Contents