Dhcp Client List - Tenda TEI480T User Manual

In order to use the DHCP server function, you should have the following
configuration:
Enable DHCP server
Start IP Address of IP Pool： The starting IP address which is appointed
by the DHCP server automatically.
End IP Address of IP Pool: The ending IP address which is appointed
by the DHCP server automatically
Lease Time: The entitled time for each client to use the IP addressed
which it obtains.
Notice: In order to use the DHCP server function of this router, the
TCP/IP protocol of the computers under the LAN should be set as
"Auto-Obtain IP Address"

4.3.4.2 DHCP Client List

The name of the host, IP address, MAC Address, Remaining Time and
Static are displayed in DHCP Client List.
The name of the host: the name of the host
IP Address: the IP address which is applied by the client
MAC Address: the MAC Address of the computer which applies the IP
address successfully
TEI480T/490T/4000 Enterprise & Net-bar Level Router
19