Wan Setting - Tenda TEI480T User Manual

Notice: If you change this IP address, you are required to use the new
IP address to log in to the WEB Management Interface, and in order to have
successful access to the Internet, default Gateway of all the computers
under this router are required to set as this IP address.

4.3.3.2 WAN Setting

First, please select the WAN access type, which means your way of
connecting to the Internet. The default mode of connecting to the Internet is
"Dynamic IP"
a. Dynamic IP: If you are having access to the Internet through dynamic
IP, you are able to obtain IP address from the ISP automatically.
b. Static IP: IF you are having access to the Internet through static IP,
you should have the fixed IP address which is provided by your ISP.
c. ADSL: If you are having access to the Internet through ADSL virtual
dialing up. In this page, you are able to change and configure the
following items:
User Name：This refers to your User Name, please input the User
Name which is provided by your ISP.
Password： Please input the Password which is provided by your ISP, if
you are not clear of these information, please contact your ISP and
require them to offer to you.
Service：Input the Service which is provided by your ISP. (Optional)
MTU: the default value is 1492, you can change according to your
requirement.
TEI480T/490T/4000 Enterprise & Net-bar Level Router
16