Url Filter - Tenda TEI480T User Manual

Steps for Client filter configuration are as follows:
1) Please Click "Security setting" and choose submenu "Client Filter"
2) Put IP address of the computer which are going to be controlled on the
LAN into the "IP" section.
3) Fill in "Port" with the port name you expect to control.
4) In "Type"', please choose the protocol used by the controlled data
packets. ("All" indicates TCP/ UDP)
5) In "Time" section, please choose the effective date and expiry date.
6) Choose "Enable" to activate this filter rule.
7) Single Click "Save" to complete setting.

4.3.7.2 URL Filter

URL Filter: Control the web pages that the hosts in LAN access to.
The steps to set URL Filter:
1) Click "Security setting", and choose submenu "URL Filter".
2) Choose "Enable URL Filter" to activate URL Filter Function.
3) Fill in the IP table with the IP segment you want to control.
TEI480T/490T/4000 Enterprise & Net-bar Level Router
28